UrbiPod FS
UrbiPod Plus +
Insert the short wick into the false floor so as to
stick up 1-2mm above the false floor
1
1
1
Place the oval shaped false floor inside the pod,
resting on the grooves inside the pod. Ensure the
central recess is facing up.
2
2
2
Insert the Multi-Flow wick into the pod and press
the central section firmly into position. The wick
should slot easily over the pod’s base.
1
Place the round wicking disc onto the round
section of the false floor, making sure it touches
the short wick. This is important for drawing
water to the plants.
Repeat for each pod. If spillage occurs, don’t worry, it
will be confined to the recess in the base and you can
clean it with a sponge or cloth.
3
3
3
Repeat for each pod
4
Repeat for each pod
2
STEP 1: WICKING SYSTEM
STEP 1: WICKING SYSTEM
STEP 2: COIR
STEP 2: COIR
Unwrap coir discs with indent holes facing up and place
one into the pod, covering the round wicking disc.
Slowly pour about 400ml of water evenly into the
indent holes in the coir disc. Do not over water or
pour too fast, as this may cause spillage.
Wait until the water is absorbed and the coir disc expands towards the top of the pod. The coir disc may over-
expand or expand unevenly. We recommend to leave about a 10mm clearance to the top of the pod. Excess coir
can be easily removed and discarded. Place the pods into the grooves in the UrbiPod base.
Round wicking disc
Short wick
1
2
