manualshive.com logo in svg

Urban MilkShuttle, Руководство по эксплуатации

Поделиться
Скачать
Urban MilkShuttle Скачать руководство пользователя страница 12

For your safety

12

2.4.2

Instructed personnel

Instructed persons are people who have received instructions from an experi-
enced person about their assigned tasks and the possible dangers of improper 
behaviour and were trained as necessary as well as instructed on the necessary 
protective equipment and protective measures.

2.5

Intended use

The "MilkShuttle" is used to mix and transport liquid nutrition for livestock.

Any other use, such as:

• transporting persons and animals

• filling with combustible substances (e. g. fuels)

• heating other substances

is not permitted.

Any 

changes to the device

 e. g. fixing the controllerare 

not permitted.

2.6

Behaviour in an emergency

1.

Immediately unplug the power plug.

2.

For devices with dosing (optional):
Switch off the device at the display.

3.

Only start up the device after the emergency situation has been eliminated.

4.

If there are obvious signs of damage to the device have a specialist check 
and repair the device as necessary before starting up again.

2.7

Laws, standards and directives

The device was developed with consideration of the following laws, standards and 
directives:

2006/42/EG

EC Machinery Directive

DIN/EN/ISO 12100

Safety of Machines

ProdSG

Product safety law

Содержание MilkShuttle

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды