Assembly Instructions
Page 4 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
THREE TIER BOOKSHELF
STEP 4.To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture. Insert the short
screws through the holes in the bracket and tighten securely using screwdriver.Pls contact your
local hardware store to get the correct anchor for your wall type.
2. Detemine where the furniture is to be placed and mark location on the wall for the other mounting
bracket screw holes. It should be placed approximately 2" below the bracket mounted to the furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screws provided through
the hole in the bracket and tightening securely using screwdriver.Please contact your local hardware
store to get the correct anchor for your wall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets on the wall.
5. Lace an end of the nylon restraint strap down through each bracket. Bring both ends together and
slide the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely laced and locked to the bracket.
