4of6
STEP 3
Make Wire Connections
-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 4
White wire from supply
White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply
Ground wire from fixture
Figure 5
Figure 3
STEP 4
-
Attach Fixture Body to
Mounting Screw
A. Place the Backplate of the Fixture Body (G) over
the Mounting Screws (B) or the Alternate Short
Mounting Screws (F) and secure with Mounting
Balls (E). Hand tighten until snug.
Mounting Ball
Backplate
Fixture Body
Mounting Screw
or Alternate Short
Mounting Screw
www.urbanambiance.com
Installation Instructions:
UQL
1
120
