SP1505-SS User Guide
FD Digital Pte Ltd
PAGE 14
V1.2
–May 8 2014
4.1 Auto Search
Auto search is a kind of intelligent and convenient mode of programs searching, which
covers programs of all frequent points of target countries or regions.
At present, this system covers many targets countries and regions.
You can move the cursor to “Auto Search” via press “UP/DOWN” key under “Installation
M
enu”, then press “OK” to enter into Auto Searching page.
1
．
After entering into auto search page, system will scan all programs one by one under
frequency points of current countries or regions selected automatically.
2
．
During scanning, press “EXIT” key to stop and exit scanning.
3
．
When all channels are detected and the scanning process is finished,
press ‘Exit” to quite
the “Main Menu/ Installation” page and display the channel to play.
4.2 Manual Search
If you understand much about digital TV and know the frequency of the program or if you
want to scan the program at any frequency required, you can select manual search, which
will allow you to save much time.
1. You can mov
e the cursor to “Manual Search” via press “UP/DOWN” key under “installation
menu”, then press “OK” to enter into manual search page.
2. Prior manual search, you need to setup relevant parameters including:
(1).Frequency (KHz): the default frequency is settled by different country, you can input
relevant digitals to modify it.
(2).Bandwidth: the default value of bandwidth is settled by different country, while you can
set it to 6MHz, 7MHz or, 8MHz.
3. Press “OK” key after setting all parameters to start manual scan.
