UPVEL
UP-102S
PoE
splitter
QUICK INSTALLATION GUIDE
Getting started
1.
S
et the correct voltage (5V, 9V or 12V) by adjustable DIP switch on the side of the splitter. Refer to the user manual of
the device you want to connect if necessary.
2. Select the connector which fits to your device and connect it to the power cable of the splitter.
3. Connect the PoE cable from your PoE switch or injector to the
Power+Data In
port of the splitter
.
4. Connect the network cable to the network interface of your device and the power cable
-
to its power port.
Package contents
•
PoE splitter
•
Power cable
•
UTP network cable
•
Power connector kit
•
Quick Installation Guide
Specifications
Standards
IEEE802.3 IEEE802.3u IEEE802.3af IEEE802.3at
Data Rate
10/100Mbps
Input Power Requirement
1/2(+), 3/6 (
–
) or 4/5(+),7/8(
-
)
Input Power Voltage
48
V DC/0.3 A,
Output Power
5V
(2A), 9
V
(1.1A), 12
V
(1A)
Jumper Cable
DC 3.9x0.2x0.37 in (2.1x5.5x 9.5mm), (L
-
12 in, 300mm)
Weight
2,7oz (76g)
Dimensions
3.15
x1.97x1.22in (80x
50
x31mm)
Environment
Operating Temperature: 14
-
113°F (
-
10°C
-
45°C)
Storage Temperature: 14
-
158°F (
-
10°C
-
70°C)
Operating Humidity: 10%~90% non
-
condensing
Storage humidity: 5%~90% non
-
condensing
Safety Approvals
CE,FCC,EN
60950:2006, Sanitary
-
Epidemiological Certificate, Rostest
If you still encounter problems or have any questions regarding
the
UP-102S
please contact UPVEL Technical Support Department:
UPVEL
Toll Free Support Hotline:
Los Angeles, CA USA
•
USA/Canada:
1 (800) 457
-
381
UPVEL is registered Trademark
Designed in USA / Made in China
