Installation and use of the USB REGEN is simple:
Power:
The REGEN requires power in the range of 6~8 volts +DC, and this
is normally supplied by the 7.5V SMPS included with your kit. (If you
wish to use a different supply, please refer to our web site for notes
about powering the device above 8VDC.)
The small amber LED on the input side of the REGEN will light
when power is applied.
Connections:
The REGEN can perform its functions at either end of your USB
cable, but is
most effective when placed at the DAC end.
Attach the ‘A’ end of your own USB cable to your computer or
other USB audio source (streamer, renderer, etc.), and the ‘B’ end to
REGEN jack marked “INPUT.”
For connection of the REGEN to your DAC, please use the solid
male/male USB A>B adaptor to obtain the best interface impedance
match. Plug the adaptor into the REGEN jack marked “OUTPUT,”
and then the entire assembly into your DAC’s USB audio input.
(Place a cube of foam or wood under the REGEN to support it if
you are concerned about strain on the jacks.) If things are too tight
around your DAC’s USB input or you just don’t want to use the
adapter, you may use the short USB cable provided.
Содержание USB REGEN
Страница 1: ...REGEN USB U s e r G u i d e Made in U S A ...
