UPTONE AUDIO LLC • MARIPOSA • CALIFORNIA • U.S.A.
Phone 1-209-966-4377 • uptoneaudio.com
Startup and Operation:
It is recommended that during the first days of use you place the LPS-1.2 with its
back panel facing where you can see the POWER LED lamp. The lamp changes color
to indicate status.
1) Set the blue rotary switch to the desired output voltage using the included screwdriver.
2) Attach the supplied DC cable to the device you wish to power and then to the
“OUTPUT” jack of the LPS-1.2.
3) Plug the supplied AC>DC power adapter into the “+DC IN” jack.
4) Fully press the Power Switch button of the LPS-1.2.
4) Wait while the LPS-1.2 performs all its startup/reset calibrations; The light will be
red, then orange, and finally green. Depending upon the output voltage selected
and the prior state of charge of the unit, the red>orange>green boot time will take
between 15 seconds and 120 seconds.
Meaning of the Power LED Colors:
GREEN: • Normal operation; the LPS-1.2 is outputting the DC voltage it is set to and
the current load of your attached device is not exceeding 1.1 amps.
RED: • Flashing red (five red pulses, then a brief pulse of green) means that your
connected device is drawing more than a continuous 1.1 amps. The LPS-1.2 will shut
off its output voltage and then return to solid green once the load is reduced.
• Solid red means the LPS-1.2 is not outputting any voltage. Unplug the AC>DC sup-
ply from the input, wait until the red light goes off completely, then plug the charging
supply back in and wait through the entire red>orange>green boot cycle.
We hope the UltraCap LPS-1.2 enhances your music system.
