© Uptime Devices 2008
www.uptimedevices.com
5. Select the Airflow calibration value.
This aids the device in determining
the presence of airflow by causing
it to send an alert if changes in
temperature have taken place within
a certain amount of time
Temperature and Airflow Sensors
–
continued
Install the device and attach the temperature and airflow sensor combo.
(See the Installation Quickstart Guide for tips on properly installing your device.)
Note: This sensor should be viewed only in situations where airflow causes changes in temperatures
6. Select the initial state of the
monitored area. (For example:
If the monitoredarea is supposed
to have constant airflow, select
“Airflow”
from the
Current Airflow
State
drop box.)
7. Now click
“Apply”
.
(Note: The sensor must be in the
`physical location where airflow is
to be measured before you click the
“Apply”
button.)
8. After clicking the
“Apply”
button
there will be an Airflow link available
on the left margin of the sensors
page. The summary page will also
have added a row of Airflow data in
in its table.
Содержание Sensor Hub
Страница 1: ......
