background image

MK550T User Manual

uSPECTRUM 
PC Software

uFLICKER
PC Software

52-72-00011-0700

Annual Product Calibration

This product is a high-precision measurement device with sensitive, please use with 
care. To ensure the accuracy of measurements, it is recommended to have the unit 
calibrated once a year. Please contact your agent or our customerservice department 
for calibration service.

Product Notes and Precautions

1. 

2.

Precautions / Warnings

Please read the following precautions to avoid fire, excessive heat, chemical leakage 
and explosion.



 

 

 

 

   

  
 

 

  

The MK550T Spectroradiometer contains sensitive components. Please unpack with 
care, as any trauma to the unit may damage the equipment. Contact your agent if the 
unit appears not to be operating normally. Do not attempt any repairs – all repairs 
must be performed by qualified service agents.
Most LCD screens have a very small and inconsequential defective pixel rate (usually 
less than 0.1%). This results in occasional pinpoints of white or other colors but will 
not affect the accuracy of measurements.

 

 
 
Do not disassemble or modify the battery.
Do not expose the battery to heat (fire) or water/moisture.
When disposing used/old batteries, wrap with insulation tape to shield the battery 
from electrical contact with metallic objects, which might ignite a fire or explosion.
If the unit is plugged into the power adapter and the battery seems to be 
overheating, or if there is smoke or peculiar odors emanating from the unit, unplug 
immediately to avoid the possibility of fire.
However, do not touch the cables if there is heat emanating from near the cables as 
melted or deformed cables could expose wiring and result in burns or electric shock.
Do not use cloth or anything to wrap or cover the equipment while charging – this 
could cause the unit to overheat, melting the casing or causing fire.
If the unit is accidently immersed in water, or if moisture has seeped inside, or metal 
objects have dropped into the casing, immediately remove the battery to avoid fire 
or electric shock.
Do not operate or store the battery in high-temperature environments - it will cause 
battery leakage and/or shorten the life of the battery .
Do not use paint thinner, benzene or other organic solvents to clean the equipment 
– this may damage the exterior finish or touch screen, and may even ignite fire.

Содержание MK550T








Отзывы: