background image

Table of Contents

SB66JRT – 0084221  

Table of Contents

Declaration of Conformity ...........................................2
Safety Rules ...............................................................3
Introduction .................................................................4
Component Identifi cation ............................................4
Special Limitations......................................................5

Platform Capacity ....................................................5
Manual Force ..........................................................5
Platform Overload Sensing System ........................5
Beaufort Scale .........................................................5

Controls and Indicators...............................................6

Battery Disconnect Switch ......................................6
Lower Controls and Indicators ................................6
Upper Controls and Indicators ................................6

Pre-Operation Safety Inspection ................................7
System Function Inspection .......................................8
Operation ....................................................................9

Cold Weather Start-Up ............................................9
Hydraulic System Cold Weather Warm-Up .............9
Preparing for Operation ...........................................9
Lower Controls ........................................................9
Upper Controls ......................................................10
Boom Operation ....................................................10
Driving and Steering ..............................................10
Drive Speeds ......................................................... 11
Motion Warning Alarm ........................................... 11
AC Generator ........................................................ 11
Air Line .................................................................. 11
Driving Lights ........................................................12
Platform Work Lights .............................................12
Emergency Lowering ............................................12
After Use Each Day ...............................................12

Transporting the Machine .........................................13

Preparing for Transportation .................................13
By Crane ...............................................................13
By Truck ................................................................13

Maintenance .............................................................14

Hydraulic Fluid ......................................................14
Check Hydraulic Fluid ...........................................14
Engine ...................................................................14
Oil Level ................................................................14
Battery Maintenance .............................................14

Inspection and Maintenance Schedule.....................15
Daily Preventative Maintenance Checklist ...............16

Preventative Maintenance Report .........................16

Decal Location ..........................................................17
Specifi cations ...........................................................20

Aerial Platform .......................................................20
Platform .................................................................20
Function Speed .....................................................20
Drive System .........................................................20
Tires ......................................................................20
Electrical System ...................................................20
Hydraulic System ..................................................20
Engine ...................................................................20
Fuel Tank Capacity ................................................20
Ambient Air Temperature Operating Range ..........20
Maximum Wind Speed ..........................................20
Working Envelope .................................................20

Содержание SB66JRT

























Отзывы: