FLEX ON TOP MODELS
Net Installation Instructions
STEP
1
Start by running the Fiberglass Rods
through the sleeves opening at the
upper edge of the safety net until you reach
the other side of the sleeve as figure 1.
STEP
2
After inserting the top rods through all the sleeves you need to connect all rods together, there is
several ways to connect it:
11
STEP
3
Repeat with remaining rods until everything is
connected together. To make the last connection
have one person stand on the opposite side, push
the rods towards the center of the ring until they are
in line with each other and make the last connection
as shown in picture.
1.
With T pole caps as figure 1.
2.
With nuts that connects it together with
Adjustable Wrench as figure 2.
2
1
UBNET12FG-4
UBNET-12FG-6
UBNET-14FG-4
UBNET-14FG-6
Enclosure Nets
UBNET-15FG-5
UBNET-15FGB-5
UBNET-15FG-6
