www.masterbattery.es
INSTALLATION MANUAL
02
PACK1
Anode
PACK4
Cathode
Caution:
Avoid damages like Sparking: Short Circuit will happen if the assembles or the maintenance is
done by a non-professional.
1
Make sure the four packs have the same voltage level by charging each one
of them completely before using them in series (Voltage difference < 0.2V).
Do not reverse the connection between the anode and the cathode, or else
the batteries or machine will damage.
Wires much bear > 100A. It is suggested to use the original wire.
2
3
Make sure there is no virtual connection or looseness and that the connector is
protected from corrosion.
Single packs charge with 14.6V and Series pack systems charge with 58.4V.
Do not use them in parallel or else it will cause spark/short circuit.
4
5
7
8
Resistance: wear resistance, seismic features. Connecting impedance < 0.1mΩ.
6
Make sure the capacity stays within 50%~60% when storing the batteries.
Temperature: 0~35˚C, humidity: 75%~65% and charge them fully every 3 months.
9
