Step 1
Install the two tires onto the uncoiler base axles and
secure in place with cotter pins.
Step 3
Tighten the set screw to secure the silver collar onto
the reel support arm shaft as shown in the photo.
Step 2
Attach the reel support arm onto the uncoiler base at
the spindle. Insert the small pin (attached to the chain)
into the pivot hole.
Step 4
Attach the handle with a bolt and locking hex nut.
Secure the handle with the other small pin (attached
to the chain).
RADIANT HEATING,
FIRE PROTECTION AND
PLUMBING SYSTEMS
SELECT UNCOILER
INSTRUCTION SHEET
cot
ter
pin
small pin
shaft collar
Introduction
The Uponor Select Uncoiler (E6062000) facilitates the uncoiling of
5
⁄
16
" to 1" Wirsbo hePEX™ plus, Wirsbo AQUAPEX®,
Wirsbo AQUAPEX plus or Uponor multi-layer composite tubing (formerly MultiCor®).
The uncoiler features an adjustable reel to allow for either horizontal or vertical uncoiling. Refer to the following
instructions to properly assemble the Select Uncoiler.
bolt
on
bot
tom
