Uponor ProPEX 201, Руководство по эксплуатации

Страница: 11 / 24

Section 3
Expander Tool Operation and
Guidelines
operating instructions
1. check the cone for dirt and clean as described in the expander tool and
head maintenance section.
2. attach the 2" expander head onto the expander tool. ensure that you
securely screw the expander head to the tool.
3. Plug in the 110v power cord of the tool.
4. use the ProPeX 201 corded expander head tool for expanding
2" uponor aQuaPeX or hePeX plus tubing only.
refer to Section 4 for detailed instructions about how to make a proper
ProPeX connection.
expander tool and Head maintenance
the ProPeX 201 corded expander tool head comes in one size (2")
and contains:
• Six segment fingers
• one attachment ring
• one spring
it is important to keep the head on the tool or in the case at all times as
dirt and other debris can affect the connection process.
1. remove and clean the segment fingers as needed. remove the segments
from the attachment ring by pushing the segment finger down toward
the opening in the ring. once you remove the first segment, the rest
follow easily.
2. Place the segments on a flat surface with the ridges facing up.
the fingers should lay flat without any curve in the middle. if the
segments are bent, replace the head immediately.
5
Section 3 – expander tool operation and Guidelines