Uponor Combi Port PRO XU l Installation manual l 15
4.1
Start up
4.1.1
Connecting the hydraulic system
Risk of injury due to improper installation!
Leaking connections can cause personal injury.
• Make sure to connect the hydraulics correctly.
• When connecting the pipes, make sure to use the supplied seals.
To ensure the proper functioning of the heating system, you must
QRWUHGXFHWKHVSHFL¿HGFDEOHFURVVVHFWLRQV7KHFRQQHFWLRQVIRU
optional components (e.g. meters) are capped with black plastic
adaptors in the device.
,IWKH¿WWLQJVDUHQRWWREHUHSODFHGZLWKRSWLRQDOFRPSRQHQWV
\RXPXVWUHSODFHWKHSODVWLF¿WWLQJVZLWKVWDLQOHVVVWHHOSLSHV
These can be obtained from your supplier.
• Make sure to connect the heating supply and return as well as
the hot and cold water correctly.
7R¿OOWKHFHQWUDOKHDWLQJV\VWHPLQVWDOOD¿OOLQJDQGGUDLQLQJ
valve on site at a suitable central point.
• Observe the hydraulic diagram as an installation guide.
4.1.2
Connect the hydraulics in the following steps:
1 Prepare pipelines.
Prepare the pipelines according to your plan.
2 Install the pipelines.
Install the pipelines in the heat interface unit according
to your plan.
3 Insulate pipes according to national regulations.
Insulate the pipes with thermal insulation.
4 When designing the facility, it should be noted that the
primary heating supply temperature is approx. 8-10 °C above
the domestic hot water temperature.
The heat interface unit is connected hydraulically.
%DVHPHQW
*URXQGIORRU
VWIORRU
QG)ORRU
UGIORRU
%DVHPHQW
*URXQGIORRU
VWIORRU
QG)ORRU
UGIORRU
4.1.3
Sample application: Implementation with a flow rate up to 1 m
3
4
Operation
