Uplus Lighting 750 BSWF, Руководство пользователя

Страница: 6 / 16

6
4.LED Light Source
The ultraviolet light emitted by the LED light source is harmful to the eyes and skin. Please do not
look directly at the lamp when it is running.
1. In order to protect the lamp, when turning off the lamp, please turn off the LED light source first,
and then disconnect the power supply after running for at least 5 minutes.
2.Do not touch the LED light source with bare hands. Once touched by hand, scrub with alcohol
and then dry with a soft linen cloth.
3.Ensure that the LED light source is installed in the central position to ensure the best results.
5.Control Menu
5.1 The main function
Turn on the machine, press the ENTER button to enter the menu mode, use the UP and DOWN
buttons to find the menu. When the preset menu is displayed on the display, press the ENTER
button to confirm. Use the UP and DOWN buttons to select the submenu, press the ENTER button
to save the setting or automatically return to the previous menu.Press the MENU button to return,
or wait for 30 seconds to exit the menu mode automatically.
When there is no power connection, press the MENU button for 3 seconds to enter the menu
mode.After setting, press the ENTER button for 1 second or wait for 40 seconds before powering
off and automatically exit the setting function.
The main functions are shown in the table below.
Menu function
A degree
menu
B degree menu C degree menu D degree menu E degree menu
Set address 0-512
Advanced
settings
Horizontal reverse Yes/No
Vertical reverse Yes/No
Display rotation Reverse/forward (Default forward)
The screen is
automatically reversed
Yes/No (Default yes)
The display is always on Open/close (Default close)
Optocoupler correction Open/close (Default close)
Data retention
Voice Chinese/English
(Factory default
Chinese)
Error message Yes/No
Factory settings
Select channel mode Standard mode (Factory default)