17
CDMA Primary Cellular
Alarm Communicator
®
CDMAEX
(INSTALLATION continued next page)
INSTALLATION (cont.)
FIGURE 2: Connections between the CDMAEX and the Alarm Panel
ALARM PANEL
Host Panel/DC In
TO RJ31X
Orange (#2)
Note: To use Uplink Remote,
connect wires #3 and #6 to the
panel as indicated in the
4530EX 4G Primary
Alarm Communicator
Yellow (#6)
Blue (#7)
Black (#3)
1
2
3
4
Switch# Setting
Off
On
Function
Normal Operations
Load Defaults
Off
On
Off
On
Off
On
Allow OTA Config
Block OTA Config
Reserved
Normal Operations
Normal Operations
RSSI Measurements
IN1+
IN1-
OUT1+
OUT1-
Uplink Remote manual.
Grey (R1)
Brown (T1)
T = Green
R = Red
Note: This connection is for
Uplink Remote and is not
required for normal operation.
To supervise the TELCO cable between the panel
and CDMAEX, connect the Orange wire (#2) to the
Blue wire (#7) and enable Panel Cable Supervision
event reporting on the website.
CDMA Primary Cellular
Alarm Communicator
Host Panel/DC Out
