UPLIFT Acoustics OneWall, Руководство пользователя

Страница: 6 / 16

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com
6
Step 1
Connect each Mobile foot to the bottom of the Posts
on a completed wall assembly using four M5x25 Ma-
chine screws. If you are not attaching casters, have
a friend help you stand the Mobile Wall upright and
move it to the desired location.
Step 1
Take a completed Wall assembly and screw a Round
foot onto the bottom of each Post.
Step 2
If you have purchased casters, remove the Glide caps
and Glides. Install the casters, and replace the Glide
caps. Have a friend help you stand the Mobile Wall up-
right, and you can roll it to the desired location.
Foot Attachment - Mobile Wall
Parts Needed:
100mm Round Foot
with threaded post.
(qty 2, per wall)
Foot Attachment - Cubicle Wall
Parts Needed:
Mobile foot
with pre-installed glides & glide caps
(qty 2, per wall)
M5x25 Machine screw
(qty 8, per wall)
Step 2
Repeat this step for all of the Cubicle Walls you have
assembled, and lean them against an open wall until
you are ready to build the cubicle assembly.