10-11 x 5/8’’
Wood screws
(qty 5)
10-32 x 3/8’’
Machine screws
(qty 10)
Corner sleeve (top)
Corner sleeve (bottom)
Barrel nuts
(qty 2)
Step 1
Use four (4) Machine screws to attach the track from your keyboard
tray to the bottom half of the Corner sleeve. (Keyboard tray track not
included in this kit. Obtain it from your keyboard tray contents)
Step 2
Take the top-half of the Corner sleeve and lower it onto the bottom
half. Tighten the Barrel nuts loosely. Do not tighten the Barrel nuts all
the way until Step 3.
Step 3
Slide the Corner sleeve onto the corner of the desktop where you
want it. Once it is in place, tighten the Barrel nuts to secure it in place.
© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
Package contents
®
Corner Sleeve
UPL143
Step 4
Drill pilot holes (1/8” wide; 5/8” deep) then use the five (5) Wood
screws to firmly attach the sleeve and track onto the desktop. Use the
screws from your keyboard tray kit to attach the rear bumper and to
add additional stability.
