Step 5
Slide your keyboard tray mechanism onto the track. (keyboard tray
mechanism not included in this kit. Obtain it from your keyboard tray
contents)
Step 6
Use three (3) Machine screws to attach the front bumper to the
keyboard tray track, to prevent your keyboard tray mechanism
from sliding forward off the track. There should be three (3) extra
Machine screws left for future use.
© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
Copyright Notice:
These instructions are a component of the UPLIFT Corner Sleeve. These instructions are part of the scope of delivery, even if the item is resold. These
instructions are also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form
without the prior written consent of UPLIFT Desk.
These instructions are subject to United States copyright law.
©
Dimensions
19.5’’ W x 11’’ D
Fits on desks 1’’ to 2.5’’ thick
Materials
Black powder-coated steel
Warranty
5 years
