© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
Step 4
At this point, your Motion-X 6-Pack Rack assembly is complete
and should look like the image to the left. Move the rack to a
location that is accessible to all users and load it up with your
Motion-X boards. The Hanger bars are designed to fit the mold-
ed base of the Motion-X boards. Insert the boards with the top
side facing up as shown in the image to the right (boards are
shown with optional Comfort Mat attached).
CAUTION:
Read all instructions before assembly. Failure to assemble or operate properly may
result in damage or personal injury. Retain manual for future reference.
CAUTIONS & WARNINGS
!
!
Copyright Notice:
These instructions are a component of this accessory. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: uplift-
desk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
©
AI-ACC052-1.0