Uplift Desk CHR458 Скачать руководство пользователя страница 3

© UPLIFT Desk

 • 800-349-3839 • [email protected] • upliftdesk.com

Seat Height Adjustment

While Seated, find the lever on the right-hand side and 

pull UP to raise or lower the Seat. Stand up to raise the 
chair higher or sit down to lower it. 

Ergo Tip:

 For proper ergonomics, your feet should be 

flat on the floor and your thighs should be horizontal. 
To find your optimal settings, refer to our Ergonomic 

Calculator:
https://www.upliftdesk.com/ergonomic-calculator/

Seat Depth Adjustment

To change your Seat depth, unlock the Seat position 
by pulling out on the lever on the right-hand side be-
low the Seat. Slide the Seat forwards or backwards as 
you desire. Release the lever to lock. 
To return the Seat to the back position, pull the lever 
and lift yourself off of the Seat. The Seat will slide back 
on its own.

Lumbar Height Adjustment

To adjust the Lumbar Support, grab the tabs on either 
side of the Lumbar Support on the Back of the chair 
and slide it up or down to the desired height.

Ergo Tip:

 Supporting your lumbar curve is very im-

portant when sitting for long durations.

Armrest Adjustments

Height-

 Pull up on the lever on the side of the Arm, 

below the arm pads, to raise or lower the armrest.

Ergo Tip:

 The arm pad should be positioned to sup-

port as much of the forearm as possible while keeping 
your shoulder in a neutral position.

Adjustment Information

Содержание CHR458

Страница 1: ...rrive inserted into the Back Simply remove them using the Allen Wrench and then use them to attach the Back to the Seat following the steps below A Place the Seat upside down on the edge of a sta ble surface such as a table B Insert the tab of the Seat into the slot on the Base and line up the holes for the Back and the Seat Have a friend keep it steady while you attach the Back to the Seat C Usin...

Страница 2: ... A The Headrest fits into the Back in a specific way Look for the lower holes on the rubber portion of the Headrest fig 01 and the recessed tab in the Back fig 02 These two parts fit together B Angle the Headrest back lining up the slots on the Headrest with the tabs on the Back and tilt the Headrest forward firmly to fit the two parts to gether C Insert two M6x20 Screws and tighten using the Al l...

Страница 3: ...side be low the Seat Slide the Seat forwards or backwards as you desire Release the lever to lock To return the Seat to the back position pull the lever and lift yourself off of the Seat The Seat will slide back on its own Lumbar Height Adjustment To adjust the Lumbar Support grab the tabs on either side of the Lumbar Support on the Back of the chair and slide it up or down to the desired height E...

Страница 4: ...er specifically made for cleaning fabric or a solution of mild alkaline warm soapy water Make sure that the soap and water mixture is not overly soapy Test on a small concealed section of the fabric first before applying to the main area Work the cleaner or soap water mixture into the stain on the fabric starting from the outside of the fabric and working your way to the middle A note about fabric...

Отзывы: