Upgrading everyday security SecuPlace WiFi, Быстрый старт

Страница: 15 / 52

15
Step 5: Registering Components
All components used in your system (detectors, keyfobs, and other wireless
devices) must be registered in order to be recognized by the system.
Registering Kit Components
Your kit comes with pre-registered components. Perform the following to
complete the registration process.
NOTE: For the kit-supplied keyfob, see Registering Keyfobs, page 16 .
1. Open each component (see the illustrations on pages 18 and 21 )
2. Remove the battery protector strips / install the batteries; a chime
sounds indicating the control panel recognizes the component.
3. Put the component covers back on.
NOTE: The factory-assigned zone numbers for the kit-supplied
components are listed below. It is recommended to write
down their locations / descriptions as well.
Listing of Component/ Zone Information
It is important to retain this listing for future reference, for example, when
performing a walk test, or when bypassing zones.
Component name & model
Zone number /
keyfob number
Zone location & description
(for keyfobs, list the
users who retain them)
Magnetic contact detector
(kit-supplied)
1
PIR detector (kit-supplied) 2
Keyfob (kit-supplied) Keyfob 1