4
Telephone Control Commands
1.
Dial the number of the premises
If your system is connected to a regular phone line. Dial the number of the panel and
wait for three rings then hang up. Wait at least five seconds and dial the number again.
On the second ring the control system answers and sounds two tones.
If your system support cellular communication dial and wait until the system answers
and two tones are heard.
2.
Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3:
Full arm
6:
Disarm
7:
Extend the call
9:
Cancel siren
2:
2 Way Audio
4XX:
HA Unit XX On
5XX:
HA Unit XX Off
430:
PGM on
530:
PGM off
*#:
Disconnect the line
Partitioned System
31:
Full Arm
32:
Arm Part. 1
33:
Arm Part. 2
61:
Full disarm
62:
Disarm Partition 1
63:
Disarm Partition 2
Keyfob
:
Full Arm
: Disarm
: Part Arm, HA/PGM
/
: Perimeter Arm, HA/PGM
Partitioned System
:
Arm P1
: Arm P2
→
: Disarm P1
→
: Disarm P2:
→
: Disarm P1+P2
Connecting to your Web Browser Application
1.
Enter the Web page address supplied by your WEB service provider and press
Go
.
2.
Log In page:
a.
User name
and
Password
– Enter values supplied by your WEB service provider.
b.
Passcode
– Enter your iConnect user code
3.
Click the Enter button
Electronics Line 3000 Ltd. 11/2011
5IN1489 B
Содержание iconnect
Страница 1: ...Quick User Guide ...
