UC-IRD+ MULTI-MODE RECEIVER / DECODER
34
Program List sub-menu: This sub-menu allows you to create a list of
programs to “pass” to the output. The programs could come from ASI
inputs, Tuner, TS/IP or the Internal CI De-Encryption block. Using the
“Mux List” sub menu select the programs to be multiplexed, all the
selected programs are labeled “Pass”, the un-selected programs are
labeled “Forbid”. Use the ENTER pushbutton to select or un-select the
programs. When you finish your selection press the EXIT pushbutton to
exit the sub-menu. A confirmation message will ask to “Confirm
changed?”, press the ENTER pushbutton to save your changes or EXIT to
leave without saving.
After a few seconds the multiplexed TS will be generated and can be used.
Configuring Ethernet Streaming
This will allow you to configure the TS/IP port on the UC-IRD+ as a
Stream Source for another device.
NOTE: This option only will be available if it is enabled on System-
>Optional Function. All the other configurations must be done before like
BISS, CI, and Input configurations.
There are different options to setup on this menu.