ASSEMBLY
Page 4 of 7
Attach Spinner Plate
Assembly (I) to
X-Base Assembly
by using (1) Short
Trusshead Screw (D)
through large screw hole in
Spinner Plate (I) to hole in
X-Base Assembly.
DO NOT tighten
completely!
5
D
Repeat Step 6 for attaching
Spinner Plate Assembly (I) to
X-Base Assembly using
3rd & 4th Short Trusshead
Screws (D). Tighten all screws
7
STOP! If you are installing casters, please refer to
instruction sheet #14532 enclosed in your caster kit.
8
STOP!
Turn Spinner Plate Assembly (I) 90º to
continue attachment to X-Base
Assembly, slight positioning
adjustment may be necessary to find hole.
To attach Spinner Plate (I), use 2nd
Short Trusshead Screw (D)
through large hole to corresponding hole
of X-Base Assembly.
6
3rd Short
Trusshead
Screw
4th Short
Trusshead
Screw
I
D
I
D
I
2nd Short
Trusshead
Screw
D
U.S. PATENT NO.
8,534,472
