
UP3D TECH CO.,LTD
58
(6) T
he order scanning is finished
4.4.5 Wax-up scanning
4.4.5.1
Gypsum model, sectioned, single wax-up (take no antagonist for example)
(1)
Create an order
A1. Create an order, select the tooth position and define a design type
A2. Select the following scan options and start scanning
Model source: model
Occlusion: none
Adjacent tooth scan: sectioned model
(2)
Model scan
A1. Follow the instructions of the scanning guide then insert the
model
A2. Click
【
Next
】
/
【
Enter
】
to scan;
A3. Check if it needs to add scan after the model is scanned (editable),if not, click
【
Apply
】
(3)
Die scanning
A1. Follow the instructions of the scanning guide then insert the
dies
A2. Click
【
Next
】
/
【
Enter
】
to scan;
A3. Check if it needs to add scan after the dies is scanned (editable),if not, click
【
Apply
】
(4)
Single wax-up scan (Use the multi-dies plate )
A1. Follow the instructions of the scanning guide then insert the
wax-up
A2. Click
【
Next
】
/
【
Enter
】
to scan;
A3. Check if it needs to add scan after the wax model is scanned(editable),if not, click
【
Apply
】
(5) Automatic alignment including: die and wax-up alignment
(6) T
he order scanning is finished
4.4.5.2
Gypsum model, sectioned, wax-up bridge (take no antagonist for example)
(1)
Create an order
A1.Create an order, select the tooth position and define a design type
A2. Select the following scan options and start scanning
Design type: wax-up (whether bridge or not)
Model source: model
Содержание ACUBLU
Страница 1: ...UP3D TECH CO LTD 1 UP3D DENTAL SYSTEM User Manual...
Страница 29: ...UP3D TECH CO LTD 29 Figure 2 16...