UP Summit XC2 Скачать руководство пользователя | Manualshive

Страница: 41 / 60

background image

______________________________________________________________________________

41

International UP warranty

Warranty conditions:

The international UP warranty covers
material- and workmanship faults and is
valid for 24 months from the delivery date.

The UP warranty covers the cost of
materials and workmanship on gliders
accepted by UP to fall under the warranty.
The UP warranty does not cover damage
caused by accidents, or by changes made
to the glider. Likewise, parts that are
damaged due to normal wear and tear are
exempt from warranty coverage. Fabric
colour changes that do not influence the
behaviour or safety of the wing are not
covered by the warranty, and neither are
faults caused by the exposure to solvents
or salt water, or plain incorrect handling of
the wing.

For any warranty claim to be accepted
the following conditions must be
adhered to:



The paraglider was used under
normal circumstances and was
maintained according to the
instructions given by UP International.
Note that these include instruction for
the correct packing, storing and
cleaning



The paraglider was only used in
accordance with its DHV certification



A complete logbook showing all
flights, with duration and location,
must be presented upon request



Only original UP spares have been
used, and only UP, or a UP affiliate
service centre, has performed repairs
or service jobs on the paraglider



A complete, correct registration card

has been filled in and sent to UP within
14 days of the purchase. Note that you
may also register your paraglider with
UP via the UP homepage

www.up-paragliders.com
>service >UP Product registration

UP reserves the right to refuse any
claims not honouring one or several of
these conditions. However, in some
cases an “ex gratia” settlement may be
offered.

Checking the
UP Summit XC²

According to German and Austrian
aeronautical legislation (§ 14 Abs. 5
LuftGerP) the owner of a glider can
check the airworthiness by his own, or
authorise a third person (for example
manufacturer/importer) to do this.

To perform your own airworthiness
check, UP International must give you
a briefing. This briefing could be done
after an agreement with UP
International and is only valid for the
UP Summit XC². The owner gets the
so-called "Nachprüfanweisung" after
completing a successful checking at
UP International.

Should the owner decide to check the
wing by himself, or employ a 3

rd

party

to do so they must make sure that
UP‟s guidelines are adhered to. Failing
to do so will void the certification.

DHV and UP International highly
recommend that you let the
manufacturer/importer or a DHV
accepted service company do the
check of airworthiness.

Packing and checking
of the rescue system

Only by regularly having your rescue
parachute repacked can you
guarantee its flawless operation! As
with the glider, the rescue parachute

«
...
39
40
41
42
43
...
»

Содержание Summit XC2





























































Отзывы:

Нет отзывов

Похожие инструкции для Summit XC2

Бренд: Techone Страницы: 8

Бренд: SOL paragliders Страницы: 36

Flexus LOTUSOne

Бренд: SOL paragliders Страницы: 41

Бренд: Flexifoil Страницы: 2

Бренд: Ozone Страницы: 12

Бренд: Rans Страницы: 319

Бренд: Rans Страницы: 82

Бренд: Hangar 9 Страницы: 44

F6F Hellcat 60 ARF

Бренд: Hangar 9 Страницы: 44

Бренд: Hangar 9 Страницы: 48

Бренд: U-Turn Страницы: 38

Бренд: airwave Страницы: 38

Бренд: Fly Products Страницы: 24

Бренд: Fly Products Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды