Page 2
Operation Panel
MENU: To enter the menu, the power switch should be on SETUP.
▲▼◄►:
Navigation arrows. (“
▲”
is the shortcut to choose “Video”, while “
▼”
for the “Photo”.)
OK : Save parameter settings. Exchange between playback and preview.
►
Shot: To capture a photo or record a video manually. (Click
►
again to stop the video.).
Power Switch: OFF: turn off the power; SETUP: change camera settings; ON: enter working mode.
3 Installing batteries
To supply power for the camera, 4, 8 or 12 AA
size ('penlight')
batteries are needed.
Confirm that the power switch is on the OFF position; load the fully charged batteries into the pack according to the
ir
c/-
polarities
(
shown below
)
. The following batteries can be used:
1.
High-density and high-performance
AA size
alkaline
or 1.5v Lithium
batteries
(
Recommended)
2.
Rechargeable 6V external
SLA
battery
(Sealed Lead Acid)
or solar panel
3.
Rechargeable NiMH AA size batteries (at least 2500mAh)
There are 6 battery slots. Slot 1 and 2 form one group and is marked “1”, slot 3 and 4 form the other group and
is
marked “2”, while slot 5 and 6 form the other group and is marked “3”.
One s
ingle “group” of batteries is needed
to supply power to the camera, but
using at least 2 "groups"
is recommended.
Figure 4 Battery Config
uration
