Quick Start
1. Load the fully charged AA batteries, 12(recommended), 8 or
4(emergency); or connect 6V external power supply;
2. Insert the SD card (32GB or smaller)
Please note if you don’t insert the SD card, the camera will
not work.
3. Slide the power switch to the “SETUP” position to set up the
camera;
4. Press the “MENU” button to enter into the program menu, then
press the “up” or “down” arrow buttons for parameter settings as
described in the user’s manual. Press the “OK” button to save
parameter settings and exit;
Please note if there is no operation for about 3 minutes, the
camera will automatically shut down to save power. If you
want to continue, please toggle the power switch to SETUP
and enter MENU again.
5. Place the camera at the target area and turn on the camera
（
slide
the power switch to “ON”
）
, the camera will take pictures or videos as
preset in step 4;
6. Press the “
” button to capture photos or record a video
manually;
7. Press the “
” button to playback the pictures/videos. Use the
“up” or “down” arrow buttons to scroll through pictures on the color
monitor;
8. To delete an image in SETUP mode, press the “
” button to
