Page 3
▲▼◄►
: Navigation arrows.(“
▲
”is the shortcut to choose “Video”, while
“
▼
”for the “Photo”.)
OK: Save parameter settings.
: Exchange between playback and preview.
DEL: To delete an image.
: To capture a photo or record a video manually. (Click again to
stop the video.).
Power Switch: OFF: turn off the power; SETUP: change camera
settings; ON: enter working mode.
3 Installing the batteries
To supply power for the camera, 12pcs of 1.5V AA batteries are needed.
Confirm that the power switch is in the OFF position; load the fully
charged batteries into the pack according the polarities signs shown
below. The following batteries with 1.5V output can be used:
1.
High-density and high-performance alkaline batteries
(Recommended)
2.
Rechargeable alkaline batteries
3.
Rechargeable NiMH batteries
There are 6 battery slots. Slot 1 and 2 form one group and is marked
“1”, slot 3 and 4 form the other group and is marked “2”, while slot 5 and
6 form the other group and is marked “3”. Single “group” of batteries is
needed to supply power to the camera, but both can be used and is
recommended.
Fig 4
