3 Advanced Operations
Page 7
PIR
prevents from taking too many photos or
videos. For example: If trigger interval is
set to 1 Min, the camera will wait 1 minute
between photo/video recordings with
motion.
Time Lapse
Time lapse function defines the camera
records/captures
automatically
every
preset time period (5seconds~8hours),
which doesn’t work if it is set to Off. The
default setting is Off.
Start-Stop
Start-stop “On” means that the camera
works only during that preset time;
Start-stop “Off” means that the camera
works round the clock. The default setting
is Off.
SYS
Set Clock
Enter to set the date and time
Time Stamp
Choose "On" or "Off" to show the time
stamp on the picture or not. The default
setting is On.
Flash Range
Infrared Flash range: 6m/20ft and 12m/
40ft. The default setting is 12m/40ft.
Password
The default password is 0000. Choose
OFF to stop this function. The default
setting is Off. Please make sure you
write down your password or store it
in your phone so you don’t lose it.
Language
English
（
Preset
），
we provide the choice for
customer to choose the language, pls
contact your distributor for assistance.
Beep
Customer can choose ON/OFF when
operating the cameras. The default
setting is On.
Overwrite
ON/OFF, if choose “ON” the camera writes
off the previous taken pictures when the
SD card is full and continues to record new
pictures/videos , thus, the SD-card is
recyclable, customer needs not to change
SD card frequently. The default setting is
Off.
Format
Format the SD-card.
