UNV DC5301, Быстрое руководство, Страница: 12 / 18

4
For outdoor use, check that the above requirements are met, and an
outdoor protection box is ready.
Installing the Dual-SFP Module
CAUTION!

Disconnect power before installing the dual-SFP module.

Choose a dual-SFP module recommended by your dealer.
Loosen the screws and remove the blank filler panel. Then, insert the
dual-SFP module and fasten the screws.
Indoor Installation
Install the device in a rack with a frame or holder. If neither frame nor
holder is available, make sure the device is installed securely, and allow
sufficient space on both sides for heat dissipation. Do not stack other
devices on the device.
The steps are as follows. Refer to the Video Encoder/Decoder Frame
Installation Guide or the 1U Holder Installation Guide for details.
1. Install mounting brackets.