UNU Power DX-1700, Руководство пользователя

Страница: 5 / 8

5
§
Charge the PowerDX-1700
1. Using included micro-­‐USB cord, the DX battery case can be
charged via any standard USB port
(apple original adapter,
laptop USB port, etc).
2. The LED indicators will flash while charging is in progress. All 4
solid LED light indicates charging is completed.
3. When both iPhone and the case were charging together, the
power source will charge the iPhone 4/4S at first. After iPhone’s
charging is completed which takes about 2~3 hours, the DX case
will start being charged automatically.
§ How to Operate the Case
1. Slide off the top piece clip from the bottom master part of the
case. And then slide the iPhone 4/4S into case properly and lock
it in position by putting back the top piece clip.
2. Once the installation in Step 1 is completed, iPhone will
recognize the case and take charge from the case automatically.
The battery icon on the upper right corner of the iPhone screen
will turn to charging state. A "beep" sound will take place if the
phone is not muted.
3. When charging is completed, please press and hold the silver
button for 2 seconds to turn off case charging and put the case
into standby mode. This will save the remaining case power for
future use.
4. Please note that if the case is in charging state while the iPhone
is at 100% power level, the energy in the case will be drawn at
first (but maybe drained at a faster pace). The iPhone's battery
power won't be consumed until the DX case runs out of juice.