Unox Evereo XEEC-1013-EPR, Руководство по установке

Страница: 13 / 16

13
EN
ELECTRICAL
CONNECTIONS
Before installing the appli-
ance, read the “
Safety regula-
tions
” section on page 4
carefully.
Connections to the power
mains and the electrical sys-
tems must comply with the
regulations in force in the country
where the appliance is installed;
and all connections must be per-
formed by qualified personnel
authorised by the manufacturer.
Failure to follow these regula-
tions may cause damage or inju-
ry; invalidates the warranty and
any other contractual relation-
ship with the manufacturer and
its subsidiaries/associates; and
relieves the manufacturer of all
liability.
Before connecting the appliance
to the mains electricity, always
compare the power supply data
with the appliance data as speci-
fied on the ratings plate.
The appliance is released from
the factory with the power ca-
ble and plug already connected
to the terminal. Do not make any
other type of electrical connec-
tion or dimensional modification
to the cable other than exten-
sions, replacing it only with a ca-
ble with the same specifications
as the original factory cable (type
of rubber, cross-section, etc.).
The cable must be replaced by
UNOX or by its technical assis-
tance service, or, in any case, by a
person with a similar qualification in
order to prevent any hazards.
6