Unoisetion MS-32J3, Руководство пользователя, Страница: 8 / 14

11 12
8. Those who are over aging.
9. Do not wear metal jewelries during the process.
10. Do not operate around metal, plastic or silicon implants.
3. Dos and Dont’s
1. Use a grounding pin and make sure the power socket of the device is
properly connected before each operation.
2. Ensure that the voltage of the device is appropriate. If the voltage of
the local power supply is unstable, we recommend that users increase
to the matching power voltage.
3. In order to ensure the therapeutic effect and normal service life
expectancy of the device, please use the specified accessories provided
or recommended by the original manufacturer.
4. The device should not be placed in wet environment or near water,
nor should they be directly exposed to sunlight.
5. Do not place the device near a strong heat source, because this may
affect the life and normal use of the device.
6. Please restrain from using the device on eyes, thyroid, parathyroid,
testicles, abdomen of pregnant women, and pacemakers.
7. Patients who are suffering from illness should consult with a doctor
and gain permission from the doctor before using.
8. Please turn off the power switch of the device, and ensure that the
total power supply of the device is turned off before the staff leaves after
daily use, so as to ensure the safety of the electrical products.
9. Use device or train device operators in strict accordance with
instructions in the user manual.
10. When taking other weight-loss drugs, it is recommended to stop
taking them for 1 to 2 months before treatment. Extension of the course
of treatment is recommended if you wish to lose weight immediately.
11. Don't use the instrument with an empty stomach. After a full meal,
wait at least 1 hour before a course of weight loss treatment.
12. Start from the lowest energy level and slowly add up.
13. When using this device, the operating parts must be kept moist and
dry skin should be avoided.
14. Clean the instrument with normal saline after operation to ensure its
cleanliness and hygiene and prolong its service life.
15. When operating, the RF probe should fully touch the skin to avoid
uneven heat.
16. Turn off the device before unplugging.
17. Apply gel evenly on the treatment area when operating on the body.
18. Wait for 3 months after any plastic surgeries or 1 month before any
plastic surgeries.
19. Make sure the entire surface of the probe is in full contact with the
skin during 40K, face RF and eye RF treatment.
4. Troubleshooting & Solutions
1. The instrument can't start and the key lamp on the back of the
instrument doesn't work?
A. Ensure that the power cord is connected to a working power outlet.
B. Ensure the fuse tube on the back of the instrument is not loose or
being burnt.
2. No energy output of the instrument?
A. Please check whether the plug connecting the instrument handle and
the body is tightly connected.
B. If the above method did not work, please contact the device
distributor for assistance.
3. The probe is too hot?
A. Check if you’ve applied gel, essence or cream.
B. Check if you’re not using the probe on skin in a while.
C. Check if the working time is too long.