background image

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This device generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this device does 

cause harmful interference to radio or television reception, which can be determined by turning the device off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the 

user's authority to operate the equipment

FCC Radiation Exposure Statement 

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm 

from all persons and must not be co-

located for operating in conjunction with any other antenna or transmitter. 

Содержание F60










Отзывы: