4
Installation
Place the hearing loop driver and connect the chosen
loop solution
Place the loop driver in a suitable place near the TV/stereo. If needed, use the velcro pads
included to fasten the loop driver to the side or back of the TV. The loop driver has very
efficient cooling and can therefore get warm in use, as the metal case leads off the heat
from the electronics. For this reason, keep the loop driver away from sensitive materials.
Loop pad
Put the loop pad under/on the cushion on the sofa/chair where you want to sit when
watching TV. Connect it to the DIN output on the rear panel.
Sofa loop
Attach the sofa loop underneath the sofa (be careful if you use a stapler) or put the loop
on the floor around the sofa, for example underneath the carpet under the sofa. Connect it
to the DIN output on the rear panel.
Room loop
The loop cable can for example be attached with the clips included on the floor trim
along the walls of the room. It can also be placed under the carpet or in the ceiling. The
Switched
power
supply
TV/Stereo
Room loop
TV/
Stereo/
Micro-
phone
Microphone
sensitivity
Head-
phones Loop pad/
sofa loop
Microphone
