UNIVIEW DC4300 Series, Быстрое руководство

Страница: 19 / 33

12
Installation procedure
1. As shown in Figure 2-2 , put the screw-hole side of the bracket
against the chassis tightly, align the screw holes on the bracket
with those on the chassis, and then fix the bracket to the chassis
tightly with two M4*8 screws.
2. Use the same method to install the other mounting bracket.
Figure 2-2 Installing the mounting brackets
1: Screws (four)
2: Mounting
bracket
3: Waist-shaped
hole
4: Screw hole
Installing the Device in the Rack
Place your device horizontally to a proper position in the rack, and align
the mounting brackets along the front posts of the rack. Put the screws
through the waist-shaped holes to contact the floating nuts on the front
posts, and fix the mounting brackets to the front posts of the rack, as
shown in Figure 2-3 .
1 2
4 3