IF DURING OPERATION, A PRODUCT JAM OCCURS, IMMEDIATELY TURN THE UNIT
“OFF” AND DISCONNECT THE POWER SUPPLY CORD. MAKE SURE THE BLADES HAVE
STOPPED ROTATING. UNLATCH THE VS9 FRONT HOUSING, SWING IT OPEN AND CLEAR
THE JAMMED PRODUCT. DO NOT TRY TO CLEAR AN OBSTRUCTION WHILE THE VS9 IS
UNDER POWER, AND NEVER INSERT FINGERS OR UTENSILS INTO THE HOPPER.
WEAR PROTECTIVE GLOVES WHENEVER HANDLING THE VS9 KNIVES, CUTTING PLATES,
OR CUTTING ASSEMBLIES. THEY ARE VERY SHARP AND CAN CUT YOU. FOR SAFETY, WASH
KNIVES AND CUTTING PLATES WITH A LONG HANDLED SCRUB BRUSH.
WHEN DISASSEMBLING OR REASSEMBLING THE VS9, MAKE SURE IT IS RESTING ON A
STABLE WORKING SURFACE. NEVER SET KNIVES, CUTTING PLATES, OR CUTTING
ASSEMBLIES ON A SURFACE THAT COULD BE MARRED.
BEFORE ASSEMBLING THE VS9AND MOUNTING IT TO THE VS2000 POWER UNIT, MAKE SURE
THAT A COMFORTABLE WORKING CLEARANCE HAS BEEN PROVIDED AROUND THE
MACHINE.
BEFORE MOUNTING THE VS9 TO THE VS2000 POWER UNIT, MAKE SURE THE FRONT
HOUSING IS SECURELY LATCHED.
THE THUMB SCREW SHOULD BE FIRMLY SNUGGED IMMEDIATELY AFTER MOUNTING THE
VS9 TO THE VS2000 POWER UNIT. DO NOT OPERATE THE VS2000 WITHOUT THE THUMB
SCREW SECURELY TIGHTENED.
Page 4
