6 of 9
Environments exposed to the risk of explosion: an atmosphere open to be transformed in an explosive
atmosphere due to the local and/or working conditions is defined potentially explosive atmosphere.
The machine has not been manufactured to work in environments with potentially explosive
atmospheres.
IDENTIFICATION OF THE MACHINE
In the back part of the machine there is a plate like the one you can see below here. That plate shows the
details of the manufacturer, the type of machine, the registration number, the electrical characteristics,
frequency, absorbed power and number of phases, and the year of manufacture.
3 OLD ROCKINGHAM ROAD, SALEM, NH 03079
TEL. 1-603-893-6191 FAX 1-603-893-1249
www.univexcorp.com
MODEL
Serial Number
Date
of
Manufacture
Voltage/HZ
Phases
kW
INSTALLATION
The machine has to be laid in vertical position, on a level surface with sturdiness suitable for the
load. DO NOT OPERATE MACHINE WITHOUT LEVELING FEET IN PLACE! Levelling feet need to
be adjusted such that the unit is level.
Electric Connection
The electric connection is to be carried out by a skilled electrician, in compliance
with the procedures, state/local codes and the regulation in force in the country of
installation. Make sure that the voltage and the frequency of the equipment are the
same of the identification plate of the machine. Damage to the machine resulting
from incorrect electrical connection will void all warranties.
DO NOT REMOVE OR TAMPER THE PROTECTIONS
AND THE ELECTRICAL AND MECHANICAL SAFETY
DEVICES THAT THE MACHINE IS PROVIDED WITH.