Dip Switch Setup
6
Dip1:
ON:
Enable auto close. The pausing time is adjustable when rotating the VR2
OFF:
Disable auto-close
Dip2:
ON:
The light flashes off when the boom stops.
OFF:
The light flashes on when the boom stops.
LED Definitions
NO
Definitions
Name
1
Opening limit switch LED. Light up when the boom has completely opened
DS2
2
Closing limit switch LED. Light up when the boom has completely closed
DS3
3
Air wave switch LED. Light up when the car is in range of the loop
DS4
4
Loop detector LED. Light up when the car is in range of the loop
DS5
5
Power LED. Lights. Lights up when the power is on.
DS1
Transmitter’s Code Setting:
Press “Learn button” until the Learn LED light turns on, then press button of your choice on the transmitter
until the Learn LED light flashes and goes out. The transmitter is now coded. Other transmitters can be cod-
ed in this manner.
Erase Transmitter’s Code:
Press the “Lean Button” and hold to make the “Lean LED” light go off. Now all the codes on the transmitter
have been cleared.
