Universal UFS50 Скачать руководство пользователя страница 26

Страница: 26 / 28

AUTHORIZED SERVICE CENTERS

For quicker repair time, you may contact

Universal Flooring Solutions

Customer Service,

+61 (02) 8678 5479

for the Authorized Service Center closest too you or visit our web site at

www.

intafloors

.com.

au.

For technical questions, call

+61 (02) 8678 5479

RETURN MATERIALS POLICY

To expedite the service relative to the return of a product purchased through

Universal Flooring

Solutions

, please observe the following:

NOTE: When returning all items, they must have been purchased within the previous twelve (12) months.

• Have the Model Number of the saw

• Have the Serial Number of the saw

• Have the location of where the saw was purchased

• Have the date when the saw was purchased

• Contact Customer Service for approval to return the item(s)

• Obtain a Returned Goods Number (RGA) authorizing the return

• Follow the packaging instructions in the following section

• Ensure your item(s) are prepaid to the destination

PACKAGING INSTRUCTIONS

• Dry the Floor Scraper before shipping

• When packing, include the following:

UFS50

Floor Scraper, nose weight and handle.

• Package the unit in its original container or one of comparable size (do not ship the unit partially

exposed)

• Ensure all parts are secured in the packaging to prevent moving

UFS50

FLOOR SCAPER

RETURN INSTRUCTIONS

Содержание UFS50





























Результаты поиска

Содержание UFS50

Отзывы:

Бренды по названию

Популярные бренды

Universal UFS50, Руководство пользователя и инструкции по эксплуатации

Результаты поиска

Содержание UFS50

Отзывы:

Бренды по названию

Популярные бренды