Universal 79105 Скачать руководство пользователя страница 14

Страница: 14 / 20

Please contact Universal

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

Please contact Universal

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 5

Step 33.

Step 34.

Step 35.

Step 36.

Step 37.

Step 38.

Step 39.

Insert EYE end of LEG PRESS CABLE (22) into bottom hole in LEG PRESS ARM (4) and fasten with 3/8” x 3” HEX

HEAD BOLT (40), 3/8” WASHER (47), STEEL BUSHINGS (32) and 3/8” NYLON NUT (50).

Place LEG PRESS CABLE (22) in groove of PULLEY (26) and attach to front slot in BASE FRAME (2) with 3/8” x

3” HEX HEAD BOLT (40), 3/8” WASHER (47), STEEL BUSHINGS (32) and 3/8” NYLON NUT (50).

Place LEG PRESS CABLE (22) in groove of PULLEY (26) and attach to LRG PRESS ARM (4) with 3/8” x 3” HEX

HEAD BOLT (40), 3/8” WASHER (47), STEEL BUSHINGS (32) and 3/8” NYLON NUT (50).

Place LEG PRESS CABLE (22) in groove of PULLEY (26) and attach in second slot of BASE FRAME (2) with 3/8”

x 3” HEX HEAD BOLT (40), 3/8” WASHER (47), STEEL BUSHINGS (32) and 3/8” NYLON NUT (50).

Insert adjustment bolt end of LEG PRESS CABLE (22) through second slot in BASE FRAME (2) then push through

BASE FRAME and pull up through third slot.

Place LEG PRESS CABLE (22) in groove of PULLEY (26) and attach in third slot of BASE FRAME (2) with 3/8” x

3” HEX HEAD BOLT (40), 3/8” WASHER (47), STEEL BUSHINGS (32) and 3/8” NYLON NUT (50).

Thread adjustment bolt into SINGLE PULLEY BRACKET (9) about 3 or 4 turns and lock by tightening nut against

SELECTOR ROD.

Содержание 79105





















Результаты поиска

Содержание 79105

Отзывы:

Бренды по названию

Популярные бренды

Universal 79105, Руководство пользователя

Результаты поиска

Содержание 79105

Отзывы:

Бренды по названию

Популярные бренды