Universal Space D-DAY, Руководство по эксплуатации

Страница: 19 / 42

D-Day Manual
12/02/2017
18
6. TROUBLESHOOTING
6.1 Common Problem
Please confirm that all connectors fit tightly.
Symptom Possible Cause Recommended action
Game will not
start
Frame assembly connector is
loose.
Check connector.
Frame assembly fault Contact with UNIS Service.
Power off
Circuit protector make power SW
in off state.
Turn on power SW again. If appeared
again and again, machine has
anomaly. Please contact with UNIS
Service.
No sound
Low volume Raise the volume.
Connector loose. Check connector.
Speaker fault. Check speaker.
POT installation error. Install POT correctly.
POT fault. Change POT.
Audio cable problem.
Reconnect the audio cable or change
it.
PC crash. Restart or system recovery.
Driver problem Restart the audio driver.
Display black
screen
Check connectors. Plug in connector tightly
Display fault.
Utilize another source such as a PC to
verity if the display is operational.
RAM is loose. Remove and reinsert RAM.
Display blue
screen
PC power cord is loose Check PC power cord whether is loose.
VGA signal cable is loose. Check VGA cable
PC video card is loose. Reseat video card.
“0X000000A” code appears.
Conflict between computer drive
and software.
Contact service
No motion and
gun is
immovable.
Stop button is activated.
Press the stop button again to
deactivate the stop button.
Seat belt unfasten. Fasten the seat belt.
No motion or
weak motion,
but gun is
movable.
Not enough air pressure for air
compressor.
Waiting for air supply.
Air compressor is off.. Turn on the air compressor.
Blow-down valve is on. Turn off the blow-down valve.
Air compressor error Change the air compressor.
Gun is
immovable.
Gun rotary motor malfunction. Change the gun rotary motor
Note: After replacing component from pc (except for RAM), and replacing monitor, the
game should be recovered again with the memory stick attached to the machine.