Universal Scientific Industrial Co. AP-AG-AT-02, Руководство пользователя

Страница: 14 / 19

14
Chapter 3 Configuring the Access Point
The 54Mbps Wireless LAN Access Point is shipped with default
parameters ,which will be suitable for the typical
infrastructure wireless
LAN
. Just simply install the Access Point, power it on, and it is now ready to
work. Nevertheless, you can still adjust configuration settings depending on
how you would like to manage your wireless network. The 54Mbps Wireless
Access Point allows for configuration either via the configuration utility,
known as Access Point Manager, TCP/IP (Telnet) connection or Web
Management.
3-1 Using the Access Point Utility
Installed on your Windows 95/98/NT/ME/2000 desktop computer, the
Windows-based utility “
Access Point Manage
r” provides a user-friendly
interface. The Access Point Manager enables you to configure all of your
Access Points on the network more easily than ever before. The following
gives instructions guiding you through the installations of the Access Point
Manager utility.
1. Insert the Software and Documentation CD into the CD-ROM drive, or the
floppy disk that came with your product kit into the floppy drive on your
computer.
2. From the Start menu on the Windows desktop, choose
Run
.
3. In the Run dialog box, type the path where the utility is located, then click
OK
. For floppy installation:
A:\setup
.
4. Follow the on-screen instructions to install the Access Point Manager.
5. Upon completion, go to
Program Files
and execute the Access Point
Manager. It will begin to browse all the Inter-Building Access Points
available on the network.
3-2 Using the Web Management
The built-in Web Management provides you with a user-friendly graphical user
interface (web pages) to manage your Access Points. An AP with an assigned
IP address (e.g.
http://192.168.1.1
) will allow you via web browser (e.g.,
Netscape Navigator 3.0 ~ 4.5 or MS Internet Explorer 4.0) to monitor and
configure the Access Point.
1. Open your web browser.
2. Enter the IP address of your Inter-Building Access Point in the Address field
(e.g.
http://192.168.1.1 ). You will have access to the
Access Point Web
Pages
of the Access Point.