Universal Scientific Industrial Co., Ltd. MP-B-IP-00, Руководство пользователя

Страница: 15 / 17

2003/7/9
15
There’s 3 property pages in the Configuration property sheet, which includes General , Encryption , and Advanced
General
In this page, user can configure the station card with its
Network type (Infrastructure/Ad hoc), SSID (up to 32
characters), channel (only in Ad hoc mode, and its range
is according to the regulatory domain setting in the
EEPROM), and the Desire Tx Rate (Automatic/ 1 Mbps/1
Mbps/ 2 Mbps/ 5.5 Mbps/ 11 Mbps)
Figure 1-3. General Settings
Encryption
By choosing this option, you can set the card with its
encryption mode to NONE or WEP, the authentication
mode to
Open system or Shared key or Auto Switch.
Figure 1-4. Encryption Settings
When set as WEP enabled, you have to set/complete the
WEP key materials key material length and specify which
one of them as the default key (1 to 4) correctly, which
means 4 different keys should be in the same length or
empty, and the default key radio button should be set to the
set with non-empty key material. If the setting is not
complete, the APPLY button will remain to be “gray” and
cannot be clicked until user do correct settings of this page.
Advanced
Choosing the Advanced option, you can change advanced
configuration settings, such as the Power Saving mode ,
Preamble Type , Fragmentation Threshold , and RTS
Threshold (See Figure 1-5). Figure 1-5 shows the
recommended configuration for the advanced settings.
Before selecting Short Preamble, make sure that the other
stations and APs are also supporting this feature.
Figure 1-5. Advanced Settings