9. Certificates
This section contains information about certificates and declarations valid for Universal Robots
e-Series robots with OEM controllers.
This document contains the following certificates and declarations:
l
9.4. EU Declaration of Incorporation
l
9.1. Shipping Materials
As stated by our suppliers, Universal Robots e-Series robots shipping materials comply with the
ISPM-15 requirements for producing wood packaging material and are marked accordingly.
9.2. Certification of Quality
Universal Robots e-Series robots undergo continuous internal testing and end-of-line test
procedures. UR testing processes undergo continuous review and improvement.
9.3. Declarations According to EU directives
Universal Robots robots are certified according to the following directives.
l
2006/42/EC – Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, Universal Robots e-Series robots are
partly completed machinery, and do not have a CE mark on them.
The declaration of incorporation according to 2006/42/EC annex II 1.B. is in section
l
2011/65/EU – Restriction of the use of certain Hazardous Substances (RoHS)
See section
.
l
2012/19/EU – Waste of Electrical and Electronic Equipment (WEEE)
For information on disposal of electrical and electronic equipment waste, refer to
chapter 7, Disposal and Environment in the robot user manual.
Installation Guide
21
OEM Control Box
9. Certificates
C
o
p
yr
ig
h
t
©
2
0
1
9
b
y
U
n
iv
e
rs
a
l
R
o
b
o
ts
A
/S
.
A
ll
ri
g
h
ts
re
s
e
rv
e
d
.
