Universal Robots 3PE Teach Pendant, Руководство по установке, Страница: 7 / 20

NOTICE
Failure to install the Teach Pendant with 3-Position Enabling Device properly can
result in damage to equipment or property.
• The 3PE Teach Pendant must be installed properly in order to meet
regulatory requirements.
2.1. Use of Product
The Teach Pendant with 3-Position Enabling Device is only certified for use with
Universal Robots e-Series control boxes.
2.2. Components
The Teach Pendant with 3-Position Enabling Device consists of the following components:
• 3PE Teach Pendant with attached Teach Pendant cable
2.3. Requirements
The robot system software, using the 3PE Teach Pendant must be newer than V5.8.0
NOTICE
Installing an Teach Pendant with 3-Position Enabling Device in a robot system
using software version older than V5.8.0 can result in damage to equipment or
property.
• Verify your software system number before installing the Teach Pendant
with 3-Position Enabling Device.
Installation Guide
Teach Pendant with 3-Position
Enabling Device
C
o
p
yr
ig
h
t
©
2
0
1
9
–
2
0
2
0
b
y
U
n
iv
e
rs
a
l
R
o
b
o
ts
A
/S
.
A
ll
ri
g
h
ts
re
s
e
rv
e
d
.